Laboratory Equipment

RECORDING INSTRUMENTS AND CONTROL

  1. PXI  pc unit with processor 2 Ghz, RAM DDR2 1Gb and HD80Gb
  2.  PXI-SCXI  pc unit with processor celeron 850 Hz and 512 sdram  PXI-8184
  3. Terminal module analog inputs / outputs with BNC connectors  BNC-2110
  4. Main frame for 4 pxi and 8 scxi cards PXI-1052
  5. Analog output card with 8 channels at 13bit PXI-6722
  6. Card with 24 digital input  and 16 Analog 16bit PXI-6220
  7. Card with 24 digital input  & 16 Analog 16bit and 2 analog out   PXI-6221
  8. 8 channel card for LVDT with 1 or 3 Vrms at 2.5, 3.3, 5 or 10KHz SCXI-1540, 2 items
  9. 24 channel card for strain gauge of 120Ω for 1/4 bridge SCXI-1521B, 2 items
  10. 8 channel measuring card voltages 0-10V or Strain Gage of all the fastenings SCXI-1520, 3 items
  11. Terminal interface unit for the SCXI-1520 card, 3 items
  12. Terminal interface unit for the SCXI-1540 card, 2 items
  13. Terminal interface unit for the SCXI-1521B card, 2 items
  14. 8 channel data logger measurements
  15. Universal scanning 
  16. Servo controller with adjustable actuator for recording
  17. Servo controller with adjustable actuator for recording
  18. Servo controller with adjustable actuator for recording
  19. Adjustable controller with temperature recorder
  20. PC for remote control of all the above units in labview

MEASURING INSTRUMENTS

  1. LVDT ±25mm, 2 items
  2. LVDT ±75mm, 5 items
  3. LVDT ±100mm
  4. LVDT ±150mm, 4 items
  5. LVDT ±300mm
  6. Extensometer 50mm
  7. Extensometer 10mm
  8. 500kN load cell
  9. 300kN load cell
  10. 20kN load cell
  11. Extensometer 100mm, 4 items
  12. PC interface for recording and measuring instruments
  13. Extensometer analog
  14. Torque wrench 20-100Nm
  15. Torque wrench 60-340Nm
  16. 2159mm gauge wire position, 3 items
  17. Magnetic field meter
  18. 3 axes EMF meter
  19. CO meter
  20. Heat and humidity data logger, 26 items
  21. Photmeter 400000Lux
  22. Heat and humidity meter, 2 items
  23. Vertical axis handheld anemometers, 3 items
  24. CO2 meter
  25. Radon meter, 3 items
  26. Three dimensional printer
  27. Radiation meter
  28. Ground resistance meter
  29. Insulation resistance meter
  30. Handheld power quality meter
  31. Energy meter
  32. Heat and humidity data logger GEMINI TINYTAG, 2 items
  33. Horizontal axis handheld anemometers, 3 items
  34. Photometers, 8 items
  35. Infrared temperature meter, 6 items
  36. Portable Weather Station

ACTUATORS - HYDRAULIC SYSTEMS - AUTOMATION

  1. Automatic ± 5MN actuator, active length ± 150mm.
  2. Automatic ± 2,5MN actuator, active length ± 250mm, with a digital gauge length (encoder) 500mm, servo valve BOSCH 40lit/min, oil filter and accumulator
  3. Automatic ± 600kN actuator, active length ± 250mm, with a digital gauge length (encoder) 500mm, servo valve BOSCH 4lit/min, oil filter and accumulator
  4. Automatic ± 300kN actuator, active length ± 150mm, with a digital gauge length (encoder) 300mm, accompanied by grabs for specimens
  5. Automatic 20kN actuator, active length ± 150mm, with a digital gauge length (encoder) 300mm
  6. Single acting hollow plunger for tension with active length 153mm and load capacity 600kN, 2 items
  7. Dual piston power, 156mm active length and load capacity of 498kN and 103kN  pull pressure
  8. Single acting piston with an active length of 150mm and load capacity 539kN
  9. low profile single acting piston with an active length of 11mm and load capacity 201kN
  10. 320bar pressure hydraulic pump with 80lit/min oil supply fully automated and controlled by  PC
  11. 250bar pressure hydraulic pump with 8lit/min oil supply and two outputs
  12. 160bar pressure hydraulic pump with 2lit/min oil supply, carrying servo valve BOSCH 4lit/min with oil filters and accumulator
  13. Hydraulic hand pump 2200cm3, double-acting with pressure gauge and switches
  14. Hydraulic hand pump 2200cm3, double-acting with pressure gauge and switches

INSTUMENTS FOR DESTRUCTIVE AND NON-DESTRUCTIVE TESTING

  1. Tensile test machine
  2. Testing machine grabs for flat plate specimen 0-15mm
  3. Testing machine grabs for flat plate specimen 15-30mm
  4. Testing machine grabs for cylindrical specimen 15-30mm
  5. Testing machine grabs for cylindrical specimen 15-30mm
  6. Amsler testing machine grabs
  7. Amsler testing machine parts
  8. Hardness meter
  9. Hardness meter Brinell 3000kg
  10. Digital microscope 5Mpix, magnification range 20 - 220x
  11. Portable hardness meter with sensor type D
  12. Impact measure machine 17Kgm & 30Kgm (Izod-charpy)
  13. Ultrasound device
  14. Metal scope
  15. X-ray radiographic device
  16. γ-ray personal radiation detection units
  17. Rotating polarization filter
  18. Furnace

TESTING FRAMEWORK

  1. Strong floor 14,45 x18, 00m with 40 lashings with a load capacity of ± 500kN
  2. Testing framework 3,20 x2, 70x7, 20m
  3. Testing framework 6,60 x6, 60x4, 95m
  4. Testing framework 1,53 x1, 10x2, 73m

VISUAL RECORDING INSTRUMENTS

  1. HD1080-60GB Camcorder
  2. Black and white usb recording cameras, 2 items
  3. IR camera
  4. IR camera
  5. IR camera

CALIBRATION INSTRUMENTS

  1. Bench Multimeter 6 ½ digits
  2. Four-channel digital oscilloscope
  3. Digital encoder with extensometer calibrators
  4. Laboratory DC Power supply 2x 0-30VDC 0-5A & 5VDC 3A
  5. Durometer calibration plate 782 HLD ± 7HLD
  6. Standard 25 mm plate
  7. Standard 50 mm plate
  8. Standard 100 mm plate
  9. Standard 150 mm plate
  10. Hardness testing block (203 HBW 10/3000 49171)
  11. Hardness testing block (204 HBW 5/750 0783773)
  12. Reference tile for ultrasound
  13. Thickness gauge
  14. Micrometer
  15. Load cell 10tn
  16. Load cell 2,5tn s type
  17. Load cell 30tn
  18. Digital recorder for 10t load cell
  19. Digital recorder for 2,5t load cell
  20. Digital recorder for 30t load cell

MEASURING INSTRUMENTS FOR CORROSION PREVENTATIVE PROTECTION

  1. Programmable salt spray machine 480 lit (comply with the ASTM B117, ISO 3768, 3769 3770 & ISO 9227 NSS, ACSS & CASS)
  2. Portable digital  pH/EC/TDS/Temperature Meter
  3. Salt spray machine
  4. Handheld thick coating meter
  5. Thick coating meter with RS-232
  6. Sandblasting cabinet

WORKSHOP EQUIPMENT

Cutting and forming equipment
  1. Drill with base
  2. Air Wrench 1-7/8'' 2000 ft / lb
  3. Plasama cut
  4. Portable milling machine
  5. Bench Grinder
  6. Angle Grinder 230mm, 2600W
  7. Hand cutting wheel
  8. Hand Drill
  9. Magnetic drill
  10. Lathe
  11. Milling drill machine
  12. Metal Bandsaw
  13. Elevation engraver 500mm precision 0.02mm with base plate
Welding equipment
  1. MIG welding with gas bottle
  2. MMA welding machine
  3. MMA welding machines, 3 items
  4. Bolt welding machine - shear bolts
  5. Electrodes drying oven  30º-110ºC 300W
  6. TIG welding with 10Lit gas bottle
Instruments for measuring weight
  1. Scale with maximum capacity of 0-3000gr, resolution 0.1gr, linarity 0.3gr, repeatability  0.1gr
  2. Scale with maximum capacity of 10kg and 10g accuracy
  3. Scale with maximum capacity of 15/30kg and 5/10g accuracy
  4. Scale with maximum capacity of 600kg
Auxiliary equipment
  1. Air compressor Toros 100lt
  2. Air compressor Toros 500lt
  3. Magnets with lifting capacity 500 kg, 2 items
  4. 16t crane with coverage 28x16m
  5. Mobile scaffolds 1x2, 5x5m, 2 items